2mm / GT Pitch Aluminum Pulley Stock

A6A50M Series:

10-13 teeth- 50mm minimum usable length

14-19 teeth ・75mm minimum usable length

20-23 teeth ・100mm minimum usable length

24-29 teeth - 125mm minimum usable length

30-39 teeth ・150mm minimum usable length

40-57 teeth ・175mm minimum usable length

60-150 teeth ・200mm minimum usable length

A6A50MXXXFA Series 2mm / GT pitch aluminum flanges available for 10-60 tooth profiles

 

3mm / GT Pitch Aluminum Pulley Stock

A6A52M Series:

9-11 teeth - 75mm minimum usable length

12-15 teeth - 100mm minimum usable length

16-19 teeth - 125mm minimum usable length

20-29 teeth - 150mm minimum usable length

30-35 teeth - 175mm minimum usable length

36-160 teeth ・200mm minimum usable length

A6A52MXXXFA Series 3mm / GT pitch aluminum flanges available for 10-44 tooth profiles

 

5mm / GT Pitch Aluminum Pulley Stock

A6A54M Series:

12-13 teeth ・150mm minimum usable length

14-17 teeth ・175mm usable length

18-40 teeth ・200mm usable length

A6A54MXXXFA Series 5mm / GT pitch aluminum flanges available for 12-34 tooth profiles

 

5mm / GT Pitch Steel Pulley Stock

A6C54M Series:

12-13 teeth ・150mm minimum usable length

14-17 teeth ・175mm minimum usable length

18-30 teeth ・200mm minimum usable length

A6C54MXXXFS Series 5mm / GT pitch steel flanges available for 12-34 tooth profiles

 

3mm / HTD Pitch Aluminum Pulley Bar Stock

A6A22M Series: 

9-11 teeth ・75mm minimum usable length

12-15 teeth ・100mm minimum usable length

16-19 teeth ・125mm minimum usable length

20-29 teeth ・150mm minimum usable length

30-35 teeth ・175mm minimum usable length

36-160 teeth ・200mm minimum usable length

A6A22MXXFA Series 3mm / HDT pitch aluminum flanges available for 10-44 tooth profiles

 

3mm / HTD Pitch Steel Pulley Bar Stock

A6C22M Series: 

9-11 teeth ・75mm minimum usable length

12-15 teeth ・100mm minimum usable length

16-19 teeth ・125mm minimum usable length

20-29 teeth ・150mm minimum usable length

30-35 teeth ・175mm minimum usable length

36-160 teeth ・200mm minimum usable length

A6C22MXXFS Series 3mm / HDT pitch steel flanges available for 10-44 tooth profiles

 

5mm / HTD Pitch Aluminum Pulley Bar Stock

A6A24M Series: 

12-13 teeth ・150mm minimum usable length

14-17 teeth ・175mm minimum usable length

18-100 teeth ・200mm minimum usable length

112-126 teeth ・150mm minimum usable length

A6A24MXXXFA Series 5mm / HTD pitch aluminum flanges available for 12-34 tooth profiles

 

5mm / HTD Pitch Steel Pulley Bar Stock

A6C24M Series: 

12-13 teeth ・150mm minimum usable length

14-17 teeth ・175mm minimum usable length

18-100 teeth ・200mm minimum usable length

112-126 teeth ・150mm minimum usable length

A6C24MXXXFS Series 5mm / HTD pitch steel flanges available for 12-34 tooth profiles

 

8mm / HTD Pitch Aluminum Pulley Bar Stock

20-45 teeth - 10.00・minimum usable length

48-80 teeth - 8.00・minimum usable length

8mm / HTD pitch flanges available for 22-80 tooth profiles

 

8mm / HTD Pitch Steel Pulley Bar Stock

20-26 teeth - 10.00・minimum usable length

28-80 teeth - 8.00・minimum usable length

8mm / HTD Pitch Flanges available for 22-80 teeth profiles

 

2.5mm / T2.5 Pitch Aluminum Pulley Bar Stock

A6A31M Series:

10-18 teeth ・50mm minimum usable length

19-21 teeth ・90mm minimum usable length

22-34 teeth - 125mm minimum usable length

35-48 teeth ・132mm minimum usable length

50-100 teeth ・160mm minimum usable length

A6A31MXXXFA Series 2.5mm / T2.5 pitch aluminum flanges available for 10-40 tooth profiles

 

5mm / T5 Pitch Aluminum Pulley Bar Stock

A6A34M Series:

10-13 teeth ・125mm minimum usable length

14-15 teeth ・132mm minimum usable length

16-19 teeth ・140mm minimum usable length

20-100 teeth ・160mm minimum usable length

A6A34MXXXFA Series 5mm / T5 pitch aluminum flanges available for 10-42 tooth profiles

 

10mm / T10 Pitch Aluminum Pulley Bar Stock

A6A38M Series:

10-13 teeth ・140mm minimum usable length

14-72 teeth ・160mm minimum usable length

A6A38MXXXFA Series 10mm / T10 pitch aluminum flanges available for 10-23 tooth profiles

 

Pulleys available machined to print from pulley stock

 

We cross reference all parts to ensure best pricing and delivery.
Please contact us to discuss and review your specific applications.